Cookie Img

Solar Three Phase Inverter with Battery Charger

Solar Three Phase Inverter with Battery Charger
Solar Three Phase Inverter with Battery Charger
Product Code : SDP-15kw
2800 - 3200 USD ($)
Price And Quantity
Minimum Order Quantity :
Unit of Measure :
Price Range :
2800 - 3200 USD ($)
Product Specifications
Output :
single / split/ three phase
Frequency :
50 or 60 Hertz (HZ)
Display :
Sensor Type :
Voltage/current sensors
Product Type :
DC to AC inverter
Operating Temperature :
-25~+60 Celsius (oC)
Pressure Type :
DC to AC
Application :
off grid system
Supply Voltage :
single / split/ three phase Volt/Ohm (v/ohm)
Warranty :
2 years
Product Description

Owing to our expertise in this domain, we are providing our clients with an extreme quality range of Solar three phase inverter with battery Charger. This inverter is extensively used to provide normal AC power from a vehicle's battery and most often in renewable energy systems. The offered inverter is manufactured by our skilled technocrats using optimum quality components and progressive techniques. Further, our clients can avail this Solar three phase inverter with battery Charger from us at most competitive prices.


  • Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, with high efficiency and balanced performance. It comes with powerful protection functioning that can protect from short circuits, overloading as well as over temperature which makes it more safer and reliable and have service life of more than 15-20 years. 
  • Intelligence, honest structure design and require cheap maintenance. 
  • Two ways to start it, one is Step Down Voltage Start and second is Variable Frequency Start.
  • LCD panel can be conveniently set the output frequency by the client
  • As per the rated voltage its output voltage can be set from -40 % to +20 %
  • Range of DC input voltage range is adjustable. Through its LCD panel over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point can be set. Quantity of  photovoltaic modules can be adjust when it is necessary required in future.
  • Fresh since wave output
  • Less frequency transformer, that ensures high efficiency inverter >94% without the loss of load.
  • Fault instruction function that can exhibit strong data. The DC input voltage os shown by the LCD. 
  • AC bypass input voltage, time and date, phase voltage, frequency, output power KWH and phase current.  
  • Displays fault code, temperature
  • These huge input voltage can be adjust as per the client's requirement and can be applicable even without the use of battery.
  • AC bypass can be added to input: Battery Power Priority or AC Battery Priority Optional.
  • The product is certified from Europe by CE (EMC and LVD) and is approved by CEC, ERAC energy network in Australia.
  • Have RS485 remote monitoring;

Technical Specification:



Isolation mode

Low Frequency Transformer

DC Input

Rated voltage (Vdc)



Rated current



AC Output

Rated output power


Output waveform

Pure Sine Wave

Rated Voltage




Single phase

3 phase 4 wire

Rated current


23A (phase current)


50Hz or 60Hz

Rated output voltage range (V)

110/120/220/230/240/380/400/415VAC optional

Power Factor


Overload Ability

150%, 5 seconds



Waveform distortion rate (THD)

<3%Linear load

Dynamic Response (0 to 100% load)




Running mode

Working continuously

Electrical insulation properties

2000Vac, 1 Minute

Protection Function


Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.

Cooling method


Short-circuit protection

No automatic recovery, need to restart the machine

Working environment

Noise ( 1 meter)


Degree of protection

IP20 indoorï

Working Altitude


Working temperature


relative humidity


Mechanical dimension

Depth x Width x Height

500 x 600 x 800mm



Contact Us

SHANGYOU INDUSTRIAL ZONE, LIUSHITOWN, Yueqing, Zhejiang, 325604, China
Phone :86-577-62776918