YUEQING SANDI ELECTRIC CO.,LTD
Split Phase to 3 Phase Converter

Split Phase to 3 Phase Converter

Send Inquiry

Technical Specifications:

Model SDT-40KW
Isolation mode Low Frequency Transformer
AC Input Rated voltage (VAC) 110/220VAC
(L1-N 110V, L2-N 110V, L1-L2 220V)
Rated current (A) 181.8A(per phase)
AC Output Rated output power 40KW
Output waveform Pure Sine Wave
Rated Voltage 380VAC±3%
Phases Three phase + N + PE
Rated current (A) 60.6A(phase current)
Frequency 50Hz
Power Factor (PF) >0.95
converter Efficiency >94%
Display LCD
Voltage Accuracy Load Balancing ≤1%, Unbalance Load ≤5%
Waveform distortion rate (THD) ≤2%(Linear load), ≤3%(Nonlinear load)
Dynamic Response
(0 to 100% load)
5%, ≤50ms(load 0~100%)
Running mode Working continuously
Electrical insulation properties 2000Vac, 1 Minute
Protection Function Overload Ability 150%, 5 seconds
Protection Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
Cooling method Fan-cooled
Short-circuit protection No automatic recovery, need to restart the machine
Working Environment Noise ( 1 meter) ≤50dB
Degree of protection IP20(indoor)
Working Altitude (m) ≤2000
Working temperature -25~+55℃
relative humidity 0~90%,non-condensing
Mechanical Dimension Depth* Width * Height 650x700x1080mm
Weight (Kg) 300Kg
Certification European CE(EMC & LVD)